| 1. |
What drill can I use with VibraClean?
VibraClean has been designed to be used with any standard SDS drill, on a hammer only setting.
|
| 2. |
How long does my warranty last?
VibraClean is backed by a lifetime guarantee.
|
| 3. |
How will VibraClean make the power-flushing process more effective?
Tests have shown that using VibraClean alongside MagnaClean PowerFlushing Filter not only speeds up the process, but contributes significantly to a higher quality power-flush. VibraClean removes more sludge in 20 seconds than 30 minutes of operation of power-flushing.
|
| 4. |
How long should I use VibraClean on each radiator?
Operate VibraClean along the base of each radiator for between 10 - 20 seconds, or as required.
|
| 5. |
How do I maintain VibraClean?
VibraClean is maintenance free. We recommend keeping VibraClean in its protective case to avoid damage to its flat surface.
|
| 6. |
Can VibraClean be used on all radiators?
Yes, VibraClean has been designed for use with all radiators. Simply engage and maintain the VibraClean head flat against the radiator. If you are using VibraClean on painted radiators, or are in anyway concerned about it marking surfaces, please line the bottom of the radiators with masking tape prior to use.
|
| 11. |
What other size MagnaClean products do you provide?
When a MagnaClean is required for larger pipework, up to 35mm, two MagnaClean Professional 28mm units can be fitted in parallel with no flow restriction. For pipework larger than 35mm we would recommend using MagnaClean Industrial from our commercial range. For more information, call our sales team direct on 01242 546700, or visit the relevant page on this site
|
