| 1. |
What is the pressure drop between flanges on MagnaClean Industrial?
The pressure drop is minimal, up to 0.2 bar.
|
| 2. |
What material is MagnaClean Industrial made of?
MagnaClean Industrial is made from 304 stainless steel.
|
| 3. |
What is the maximum temperature the magnets will withstand?
The magnet can take up to 140°C.
|
| 4. |
Where on the system should I install MagnaClean Industrial?
MagnaClean Industrial should be installed on the return of the circuit, as close to the boiler as possible.
|
| 5. |
Does MagnaClean Industrial come with a warranty?
Yes, MagnaClean Industrial is backed by a two year limited warranty, starting from the date of installation.
|
| 6. |
What is the maximum flow rate that MagnaClean Industrial will allow?
The flow rates on the system will vary according to the boiler and pump size. In order to work out the flow rate you will need to know the pipe size, the quantity of boilers, the number of pumps on the system and their individual sizes. You can fill out these details on our Contact page and we will contact you within 48 hours of your enquiry with the suggested MagnaClean Industrial for your system. Alternatively, look at our Technical Specification page.
|
| 7. |
Which side is the inlet on MagnaClean Industrial?
Either side can be used as inlet or outlet; it will not affect the performance of MagnaClean Industrial.
|
| 8. |
Can I fit MagnaClean Industrial vertically?
Yes. However, when servicing, allow extra time, as you will need to open one of the valves, let the water flush through and drain until the sludge is removed and the water is clear.
|
