1. 

Does the flow go into the top or bottom outlet?

The flow through MagnaCleanse RapidFlush Filter should enter the bottom right inlet and exit top left. This allows the MagnaCleanse RapidFlush Filter to collect large or heavy particles at the bottom of the filter and prevent them from continuing in the flow.

2. 

Is the MagnaCleanse RapidFlush Filter compatible with other power-flushing machines?

Yes. The MagnaCleanse RapidFlush Filter is supplied with universal quick release couplings and is therefore adapted for use with all power-flush machines.

3. 

Can the flow be reversed using the MagnaCleanse RapidFlush Filter?

This is not required when using the MagnaCleanse process because VibraClean provides the agitation required. If you are using a power-flushing machine linked to the MagnaCleanse RapidFlush Filter, we recommend when reversing the flow, that 15 seconds in each direction (forward, reverse, forward, reverse, forward) will agitate the water well and ensure that the sludge is mobilised.
Important: After agitating the water, be sure to set the flow direction so that the liberated sludge is caught by the MagnaCleanse RapidFlush Filter and does not pass back into the boiler.

4. 

Does the MagnaCleanse RapidFlush Filter have a sheath on the magnets?

No. As the MagnaCleanse RapidFlush Filter magnets are more powerful than our MagnaClean domestic products, a sheath is not included. To service, simply remove the lid assembly with the magnet attached and take to a bucket. Wearing gloves, remove a third of the sludge at a time and then replace lid and magnet into canister.

5. 

Where should I fit the MagnaCleanse RapidFlush Filter on the system circuit?

In order to achieve best performance, it is recommended that that the MagnaCleanse RapidFlush Filter operates between the last radiator on the system and the boiler. When carrying out a MagnaCleanse, it is important that the filter is placed in the above location.

6. 

What temperature does the MagnaCleanse RapidFlush Filter operate to?

The MagnaCleanse RapidFlush Filter operates to temperatures up to 100°C.

7. 

Can I use chemicals with the MagnaCleanse RapidFlush Filter?

Yes. The MagnaCleanse RapidFlush Filter can be used with any of the leading chemical or acids on the market. It is also possible to use the large black canisters as a dosing vessel to release chemicals into the system.

8. 

Can the MagnaCleanse RapidFlush Filter be used with the MagnaCleanse process?

Yes. The product has been designed specifically for use in conjunction with both the MagnaCleanse process and traditional power-flushing. For more information on the MagnaCleanse process, please refer to our information leaflet which is available at www.adeysolutions.co.uk or by calling 01242 546700.